Sunday, January 23, 2011

Smoke alarm project using 555 timer IC

-Pradeep G
This project uses a 555 timer IC with an optical sensor to create a smoke detection alarm system. The optical sensor consists of an IR diode and a photodiode with a small gap in between. During normal condition the photodiode is receiving the IR signal from the IR diode. The presence of smoke interrupts the signal to the photodiode which in turn activates the 555 timer IC to generate alarm. The timer IC is configured as an astable multivibrator with a frequency in the audible range.




16 comments:

  1. Interesting and important information. It is really beneficial for us. Thanks

    Undercounter freezers

    ReplyDelete
  2. Buy Earthquake Auger Drills from esportsmandirect.com. Earthquake augers Drills we carry high quality of Auger Drills at our store. Earthquake Auger Drills

    ReplyDelete
  3. what is the price of the photo interrupter module ???

    ReplyDelete
  4. what would be approx. cost of making this project ?

    ReplyDelete
  5. IT WORKS!!!
    IT COSTED ME AROUND 50-60rs

    ReplyDelete
  6. could you plz tell me how to collect information to write a project report on this topic,i am a 2nd yr student nd ve to submit a project report on it?

    ReplyDelete
  7. You will sleep worry-free protected by smoke detectors and fire extinguishers. Fire safety is very important to all households and businesses.

    Fire Extinguisher Sales & Service in Las Vegas

    ReplyDelete
  8. This comment has been removed by the author.

    ReplyDelete
  9. if we replace the photo interrupter module by a photo transistor and an infrared led,will this circuit work as a burglar alarm?

    ReplyDelete
  10. Takk for god informasjon, innholdet er stille interessant. Jeg vil vente på ditt neste innlegg.
    Liten røykvarlser

    ReplyDelete
  11. It work its cost around 60 to 70

    ReplyDelete
  12. It work its cost around 60 to 70

    ReplyDelete